Protects air systems exposed to temperatures below freezing

Produces pressure dew points of 
-40°F (_40C), -100°F (-73°C)

Features

  Consistent outlet pressure dew points - large desiccant beds produce:
 -40OF (-400C) pressure dew point on a 10 minute cycle [equals an atmospheric dew point of -71 OF (-570C)l
                             or
 -100OF (-730C) pressure dew point on a 4 minute cycle [equals an atmospheric dew point of -122OF (-860C)l
Minimum purge air usage - saving the heat of adsorption maximizes the moisture holding capacity
  of the purge air, minimizing the amount required
  Long desiccant life - beds sized to prevent
  fluidization plus slow and complete regeneration prevent desiccant movement and deterioration
 Heavy duty purge exhaust muffler for quiet operation
 Non-lubricated, soft seated control valves

  Highly accurate solid state timer
  Standard 10 minute cycle ... gives increased desiccant life over units operating on shorter cycles
  Allows off -stream tower to fully repressurize before going on-stream ... prevents bed movement and loss of pressure downstream
 Can be field adjusted for 4 minute cycle if -100OF
  (-73,C) pressure dew point is required

Front mounted control panel 
  Power on light
 On-off switch
 Tower pressure gauges

HF Series coalescing filter packages
 Grade 5 oil removal prefilter to 0.008 ppm (0.01 mg/ml) 0 Grade 6 dry desiccant afterfilter (I micron)

Stainless steel support screens and air cliff users (top and bottom of vessels)
 easily removed for cleaning
 Filters out gross contaminants ... protects valves
 Prevents channeling

Furnished in cabinet for easy wall mounting * Completely assembled, piped, and wired
  Shipped with full charge of desiccant
  Only hook-up of utilities is needed to operate
  6' (1.8 m) cord set standard